Septic System Repair
Baffles, lines, lids, pumps, and drain field repairs across the Front Range.
Learn more about Septic System Repair
Septic Pump Chamber and Lift Station Service
When the drain field sits uphill from the tank, a pump moves effluent to it. Pump chambers and lift stations have floats, panels, and alarms, and every one of those parts eventually needs service.
Get Your Free Quote!
- Alarm diagnosis, same day where possible
- Pump, float, and control panel replacement
- Chamber pumping and cleaning
Pump chamber and lift station A pump chamber, or lift station, is a basin with a pump and float switches that moves septic effluent uphill or to a field that sits above the tank. It runs on electricity and is controlled by an alarm-equipped panel.
When the pump or a float fails, effluent has nowhere to go and the tank backs up toward the house, usually with the alarm sounding first.
- Family Owned & Operated
- 20+ Years of Septic Experience
- Serving Denver & the Front Range
- Licensed & Insured
Licensing, experience, and credentials
- 20+ years in business
The situation
How pumped systems fail
A pump chamber holds effluent after it leaves the septic tank and pumps it to the drain field on a float signal. A lift station does the same job for a house that sits below the tank. Both add moving parts to a system that otherwise runs on gravity.
Failures cluster around four things. The pump burns out, a float tangles or sticks, a breaker or GFCI trips, or the control panel fails. Any of them lifts the water level until the high water alarm sounds. The alarm is your warning window before a backup, and it is usually a short one.
How the job runs
How we service a pump chamber
Check power and panel first
Breakers, GFCIs, and panel faults account for a large share of alarms and cost almost nothing to rule out.
Test floats and cycle
We manually run the floats to see whether the pump responds and where the sequence breaks.
Pull and test the pump
If the pump is dead we confirm the correct horsepower and head before setting a replacement.
Clean the chamber and verify
We pump the chamber, clear grease and debris off the floats, and watch a full cycle before leaving.
Why us
Why call us for pump work
- We diagnose before replacing parts
- Replacement pumps sized to the system, not to what was on the truck
- Alarm calls treated as urgent
- Clean electrical connections and proper float settings
What it costs
What drives pump chamber cost
Whether the fault is electrical, a float, or the pump itself. Pump horsepower and depth, chamber access, whether the chamber needs pumping to work in it, and any panel or wiring replacement.
Questions
Pump chamber questions
Keep going
Related services
Emergency Septic Service
Backups, overflows, and surfacing effluent handled the same day.
Learn more about Emergency Septic ServiceSeptic Tank Inspection
A full read on the tank, baffles, outlet, and field before you buy or repair.
Learn more about Septic Tank InspectionProblems this service fixes
Talk to a septic company that answers the phone
Family owned and operated, serving Denver and the Colorado Front Range for over 20 years.